BARTON WATCH BANDS - Ballistic Nylon NATO® Style Straps - Choice of Color, Length & Width (18mm, 20mm, 22mm or 24mm)
BARTON WATCH BANDS - Ballistic Nylon NATO® Style Straps - Choice of Color, Length & Width (18mm, 20mm, 22mm or 24mm)
Couldn't load pickup availability
Product Description
BARTON’s Ballistic Nylon Military Style watch bands are custom designed and fabricated to meet the highest standard of fashion, function and fit.. Swap your bands in seconds to compliment your daily wardrobe.
Selecting Width:
Straps are available in 18mm, 20mm, 22mm and 24mm widths.To determine the proper width for your watch, use a metric ruler to measure the ‘lug width’ (the point on the watch head where the band attaches).Lug widths for most common watches are also available from the manufacturer online.
Selecting and Adjusting Length:
All widths (18mm, 20mm or 22mm) of our original 'Standard' length band measure approximately 10-inches in total length and fit wrists from 5" to 7 1/2" in circumference.All widths (20mm, 22mm and 24mm) of our 'Long' version measure 11-inches in total length and fit wrists from 6" to 8 1/2".However, watch size and geometry also impacts fit.Those with larger wrists (above 7 1/4") typically prefer the 'long' version.If band is longer than desired, fold free end neatly back into the keeper loop or cut to desired length.If trimmed, expose cut end to match or lighter flame to avoid fraying.Full money back guarantee for anyone that does encounter a fit issue.
Attaching the Band:
Refer to diagram in picture above.First, remove original band and reinsert spring bars into watch head (replacement spring bars sold separately on Amazon if needed).Then, simply feed strap between the spring bar and watch casing, behind watch head and up through the other spring bar.Run through stainless steel ring on short strap to secure watch head.No need to remove spring bars (pins) to swap between different colors.
BARTON NYLON MILITARY STYLE WATCH BANDS
OurNYLON Military Stylestraps are a must have for any watch enthusiast!Crafted from ballistic nylon, these straps are waterproof, washable and ready for any occasion.
Our Military Style straps are available in two lengths.The'standard' length(10") generally fits wrists from 5" to 7 1/2" in circumference and is available in widths of 18mm, 20mm and 22mm.The 'long' version(11") generally fits wrists from 6" to 8 1/2" and is available in 20mm, 22mm and 24mm widths. Those with wrists under 7" typically prefer the 'standard' length band and those with wrists over 7 1/4" typically prefer the 'long' band.
DETERMINE PROPER WIDTH FOR YOUR WATCH
- Check the underside of your current band to see if the width is marked
- Use a metric ruler to measure the width where the current band attaches to the watch head
- Search online for the specs of your watch make/model
*If your watch has an odd lug width of 19mm, 21mm or 23mm select the strap that is one mm wider.The leather will squeeze in nicely.
COMPATIBLE LUG WIDTHS
These bands are compatible with any traditional watch that uses standard18mm, 20mm, 22mm, and 24mmspring bars.
*If your watch has an odd lug width of 19mm, 21mm or 23mm select the strap that is one mm wider.The strap will squeeze in nicely.
ATTACHING THE STRAP
Refer to diagram in picture above.First, remove original band and reinsert spring bars into watch head (replacement spring bars sold separately if needed).Then, simply feed the leather strap between the spring bar and watch casing, behind watch head and up through the other spring bar.Run through leather ring on short strap to secure watch head.No need to remove spring bars (pins) to swap between different colors.
ADJUSTING LENGTH
If band is longer than desired, fold free end neatly back into the keeper loop or cut to desired length. If trimmed, expose cut end to match or lighter flame to avoid fraying.
